From: <dmcnews_at_dml_yahoogroups.com>
To: <dmcnews_at_dml_yahoogroups.com>
Subject: [DML] Digest Number 1640
Date: Thursday, August 28, 2003 12:44 PM

To address comments privately to the moderating team, please address:
moderators_at_dml_dmcnews.com

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews

There are 4 messages in this issue.

Topics in this digest:

1. Re: Lambda system troubleshooting
From: Martin Gutkowski <webmaster_at_dml_delorean.co.uk>

2. RE: Re: Electrical gremlins... no power to coil
From: Travis Goodwin <tgoodwin_at_dml_vantagep.com>

3. Replacement Battery
From: "Kevin Abato" <delorean_at_dml_abato.net>

4. aftermarket gaskets
From: jordan rubin <nuttenschleuder_at_dml_yahoo.com>





Message: 1
Date: Thu, 28 Aug 2003 11:00:55 +0100
From: Martin Gutkowski <webmaster_at_dml_delorean.co.uk>
Subject: Re: Lambda system troubleshooting

Knut wrote an article on it in one of the DCO newsletter available off 
the DMCnews page (he says without checking, but I think they're still 
there).

The best way to set it up is with a proper gas analyser in the ports on 
the crossover pipe, but they're a pain to get to.

Martin

cruznmd wrote:

>Can someone please post or email me the O2 sensor voltage outputs?
>
>  
>






________________________________________________________________________
________________________________________________________________________


Message: 2
Date: Thu, 28 Aug 2003 09:03:11 -0400
From: Travis Goodwin <tgoodwin_at_dml_vantagep.com>
Subject: RE: Re: Electrical gremlins... no power to coil

It's always the littlest things.
Here's a quick description of what I did last night. 

I turned the key to on and put my voltmeter on fuse 1 (while the fuse was
still installed). I heard (what I believe to be) the RPM relay click. That
seemed odd. Was that a stuck relay? Then I yanked fuse 1 and cleaned its
contact and sprayed a little electrical cleaner on it. With the fuse back
and fingers crossed, I cranked the engine.

It fired up. The engine hunted for about 15 seconds, trying to stall.
Eventually, the idle smoothed out and purred at 900-1000 RPMs.



________________________________________________________________________
________________________________________________________________________


Message: 3
Date: Thu, 28 Aug 2003 08:40:23 -0500
From: "Kevin Abato" <delorean_at_dml_abato.net>
Subject: Replacement Battery

I feel dumb for even asking this.....

I want to put a new battery in my Delorean, but I am not sure what type to use (not brand, just the type/rating)

the only time I ever did this for a car, I used a book at the auto parts store to look up my model.  The few times I have tried this, the book does not list Deloreans.  And every time I mean to look at the battery in the car, I forget.

Also,  I store my car from Nov-Mar and do not run it.  Dont know if that plays into choosing a battery or not.

So here I am... asking what should I get?

Kevin Abato
Vin# 16680



________________________________________________________________________
________________________________________________________________________


Message: 4
Date: Thu, 28 Aug 2003 06:50:06 -0700 (PDT)
From: jordan rubin <nuttenschleuder_at_dml_yahoo.com>
Subject: aftermarket gaskets

Hello all,

    Does anyone know if there are aftermarket gaskets
available for the delorean.   i.e. felpro, for the
auto transmission pan, the valve covers and the
exhaust manifold.


thanx 
jordan 11613

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com



________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/